Positioning The Display - Christie HS Series Installation And Setup Manual

Positioning the display

When you select a position for the projector, consider the size and shape of your screen, the
location of your power outlets, and the distance between the projector and the rest of your
equipment. Follow these general guidelines:
• Position the projector on a flat surface at a right angle to the screen. The projector (with the
standard lens) must be at least 5.2 ft (1.6 m) from the projection screen.
• Position the projector to the required distance from the screen. The distance from the lens of
the projector to the screen, the zoom setting, and the video format determine the size of the
projected image.
• Determine the lens throw ratio.
For more information detailing the throw ratio for each lens, refer to the HS Series D16-20
Specification Guide (P/N: 020-001467-XX).
• 360 degree free orientation operation
When installing the projector in portrait orientation, Christie recommends that the built in keypad and
power inputs face upwards. This allows access to the built in keypad and power connections during
operation.
HS Series D16-20 Installation and Setup Guide
020-001464-02 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
HDBaseT
T16A/250V~
Installation and setup
20