Christie HS Series Installation And Setup Manual page 8
Hide thumbs
Also See for HS Series:
- Service manual (112 pages) ,
- User manual (73 pages) ,
- Product safety manual (57 pages)
Table of Contents
Advertisement
For US market only, hazard distances based upon FDA guidance document 1400056, Classification
and Requirements for Laser Illuminated Projectors (LIPs), dated February 18, 2015:
Projection lens
0.84-1.02:1 zoom lens
1.02-1.36:1 zoom lens
1.2-1.5:1 zoom lens
1.5-2.0:1 zoom lens
2.0-4.0:1 zoom lens
4.0-7.2:1 zoom lens
For all other markets, hazard distances based upon IEC 62471-5:2015, Photobiological safety of
lamps and lamp systems – Part 5: Image projectors:
Projection lens
0.84-1.02:1 zoom lens
1.02-1.36:1 zoom lens
1.2-1.5:1 zoom lens
1.5-2.0:1 zoom lens
2.0-4.0:1 zoom lens
4.0-7.2:1 zoom lens
For installations in the United States
The following must be in place for laser-illuminated projector installations in the United States:
•
Any human access to the hazard zone, if applicable, must be restricted by barriers to enforce
the no access zone.
•
Permanent show installations containing Risk Group 3 laser-illuminated projectors must meet
the following conditions:
•
Installed by Christie or by Christie-authorized and trained installers. Refer to the Laser
Illuminated Projector-Class 1 Risk Group 3 Installation training (Course code: CF-LIPI-
01) on the http://www.christieuniversity.com site.
•
Performed according to instructions provided by Christie.
•
Ensure the projection system is securely mounted or immobilized to prevent unintended
movement or misalignment of the projections.
•
Temporary show installations containing Risk Group 3 laser-illuminated projectors may be
installed by Christie or sold or leased only to valid laser light show variance holders (laser light
show manufacturers) for image projection applications. Such manufacturers may currently hold
a valid variance for production of Class IIIb and IV laser light shows and/or for incorporation of
the Risk Group 3 laser-illuminated projectors into their shows. This requirement applies also to
dealers and distributors of these laser-illuminated projectors.
HS Series D16-20 Installation and Setup Guide
020-001464-02 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Part number
140-114107-XX
140-115108-XX
140-109101-XX
140-110103-XX
140-111104-XX
140-116109-XX
Part number
140-114107-XX
140-115108-XX
140-109101-XX
140-110103-XX
140-111104-XX
140-116109-XX
Introduction
Hazard distance (m)
1.0
1.0
1.0
1.6
1.6
2.8
Hazard distance (m)
1.0
1.0
1.0
1.0
1.0
1.6
8
Advertisement
Table of Contents
