Christie HS Series Installation And Setup Manual page 10

Moving parts hazard. To avoid personal injury, keep hands clear and loose clothing tied back.
Fan hazard. To avoid personal injury, keep hands clear and loose clothing tied back. Always
disconnect all power sources before performing maintenance or service procedures.
Voltage hazard. To avoid personal injury, always disconnect all power sources before performing
maintenance or service procedures.
Not for household use.
Mandatory action
Consult the service manual.
Disconnect all power sources before performing maintenance or service procedures.
Electrical labels
Indicates the presence of an earth ground.
Laser labels
Christie Digital Systems Canada Inc.
809 Wellington Street North
Kitchener, ON N2G 4Y7
Canada
This product complies with performance standards for laser
products under 21 CFR Part 1040 except with respect to those
characteristics authorized by Variance Number 2016-V-1838
effective June 20, 2017.
U.S.A Only
Additional hazard labels
HS Series D16-20 Installation and Setup Guide
020-001464-02 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
FDA laser variance (US projectors only)
Indicates a light hazard. Do not look directly into the lens. The extreme high
brightness can cause permanent eye damage. Class 1 Laser Product-Risk Group 3
according to Class 1 IEC 60825-1:2014 and IEC 62471:2006.
Do not look directly into the lens. The extremely high brightness can cause
permanent eye damage.
Introduction
10