Installation And Setup; Site Requirements; Physical Operating Environment; Power Connection - Christie HS Series Installation And Setup Manual

Installation and setup

Learn how to install, connect, and optimize the projector display.

Site requirements

To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.

Physical operating environment

Provides specifications for the operating environment.
• Ambient temperature (operating): 0°C to 40°C (32°F to 104°F) up to 2500 ft
• Humidity (non-condensing): 10% to 85% RH
• Operating altitude: 10,000 ft maximum at 0°C to 30°C ambient temperature

Power connection

The projector uses an AC power system that allows the projector to operate at full brightness with a
power supply of 120-240 VAC or 200-240 VAC, depending on the models and regions. Operating
the device outside of the voltage range may cause unsatisfactory operation or damage to the
projector. Christie recommends a 20 A rated wall breaker for the installation. To ensure safe
operation, only use the AC power cord provided with the product or recommended by Christie.
See Connecting to AC power

Physical specifications

Learn the dimensions and weight of the projector before installation.
• Projection size, excluding lens, feet (L x W x H): 26.6 x 23.5 x 8.0" (677 x 596 x 203 mm)
• Shipping size, without lens (L x W x H): 38 x 31.3 x 14.4" (965 x 795 x 365 mm)
• Weight, without lens: 41.6 kg (91.52 lbs)
• Shipping weight, without lens: 53.3 kg (117.7 lbs)
HS Series D16-20 Installation and Setup Guide
020-001464-02 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
on page 26 for further information on the power requirements.
14