Table of Contents
Advertisement
Maintenance
1
4.4.2 Cleaning/replacing the UV low pressure
lamps in the side section
2
3
4
5
6
7
Removal
8
Danger of burns!
Make sure that the UV low pressure lamps have cooled
down.
9
•=
Disconnect sunbed and secure against
accidentally being switched on again (refer to
section 4.3).
10
•=
Unscrew the screws (1) at the head and foot
ends and carefully fold down the acrylic panel
(2).
11
28
1
2
04011 / 0
•=
4
3
04022 / 0
Remove the UV low pressure lamps (3) and (4)
and change, cleaning with a damp cloth if
necessary.
Installation
•=
Insert the UV low pressure lamps with the
lettering towards the foot end and rotate by 90
degrees (1/4 turn) until they catch. The lettering
is on the visible side of the UV low pressure
lamps. Do not align the lamps by the lettering.
•=
For further assembly proceed in reverse order.
Advertisement
Table of Contents
