Table Of Contents - ergoline Classik 475 Manual

Contents
1 General
1.1 Directives
1.2 Intended Use
1.3 Export
1.4 Safety
1.5 Care and Maintenance
1.6 General tanning instructions
1.6.1 General information
1.6.2 General safety instructions
1.7 Recommended tanning times
2 Description
2.1 Equipment type
2.1.1 Name plate
2.1.2 Number plate
2.1.3 The position of the name plate / number plate
2.2 Description of the sunbed
2.3 The phases of the tanning programme
2.4 Settings
2.5 Display
2.6 Decorative lighting
2.7 Sound system
3 Operation
3.1 Starting the tanning programme
3.1.1 Switching on UV Lamps
3.1.2 Switching off the UV lamps before ending the programme
3.1.3 Surround Cooling
3.1.4 Air conditioning
3.1.5 Power switching
3.1.6 Sound System
6
4 Maintenance
4.1 Maintenance intervals
4.2 Care and maintenance tasks, Cleaning
4.3 Disconnecting the sunbed from the mains/preventing from switching on
4.3.1 Disconnecting from mains
4.3.2 Preventing from switching on again
4.4 Replacing and cleaning lamps
4.4.1 Cleaning/replacing UV low pressure lamps in the lower section
4.4.2 Cleaning/replacing the UV low pressure lamps in the side
section
4.4.3 Cleaning/replacing the UV low pressure lamps in the canopy
4.4.4 Switching decorative lighting on/off changing/cleaning
4.5 Changing filter mats
4.5.1 Changing filter mats in the lower section
4.5.2 Changing the filter mat in the canopy
4.6 Maintenance of the air conditioning unit
4.6.1 Emptying the overflow tank
4.6.2 Cleaning the sieve cylinder and lamellas
4.7 Settings
4.7.1 Setting mode
5 Fault, cause and remedy
5.1 Fault table
5.2 Fault indications in the display
6 Technical data
6.1 Output
6.2 Dimensions
6.3 Lamps fitted