Table of Contents
Advertisement
3
Operation
3.1 Starting the tanning programme
The tanning programme can be started using the coin
device MCS VI
or a compatible timer or directly on the
1)
sunbed.
Note!
The canopy should be folded down during tanning.
Operating the sunbed with the tanning space open will
reduce the level of effectiveness.
see the coin device instruction for use
1)
3.1.1 Switching on UV Lamps
1
02581 / 0
•=
During the warm-up phase you can switch on the
UV lamps directly using the START/STOP button
(1).
3.1.2 Switching off the UV lamps before ending
the programme
1
04030 / 0
•=
During tanning time, you can switch off the UV
lamps by pressing the START/STOP button (1).
•=
Pressing the START/STOP button (1) again will
switch the UV lamps on again.
Note!
Switching off the UV lamps before the end of the
programme will not interrupt the tanning programme.
Operation
1
2
3
4
5
6
04030 / 0
7
8
9
10
11
19
Advertisement
Table of Contents
