Terminal Setup (Fgsw-2624Hps Only) - Planet FGSD-1008HPS Quick Installation Manual

4. Terminal Setup (FGSW-2624HPS Only)

To configure the system, connect a serial cable to a COM port on a PC or notebook
computer and to RJ45 type of serial port of the FGSW-2624HPS.
PC / Workstation
with
Terminal Emulation Software
Serial Port
Figure 4-1: FGSW-2624HPS Console Connectivity
A terminal program is required to make the software connection to the FGSW-
2624HPS.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port should be
configured as:
 Baud: 115200
 Data bits: 8
 Parity: None
 Stop bits: 1
 Flow control:
8
RS232 to RJ45 Cable
Figure 4-2: COM Port Configuration
Managed Switch
RJ45
Console Port