Daisy Chain Connection Diagram - Planet KVM-800 User Manual

Step 9 Connecting Other PCs
Repeat step 5 to 7 for the remainder of the computers.
Step 10 Connecting KVM Power
Attach the power supply to the KVM unit and plug the other
end into an electrical receptacle. Now you will see the LED for
Port 1 light up, and you will hear a beep. Switch on your
monitor.
N :
OTE
Please be reminding to plug in power adapter. Although the
PCs connected to KVM Switch are able to support enough
power to the stand alone switch, KVM Switch still needs a
power adapter for daisy chain more banks. If you forget to plug
in power adapter on the status of daisy chain, it may cause the
unexpected status occurred.

2.5 Daisy Chain Connection Diagram

Please use the bundle 3 feet 3-in-one daisy chain Cable
Kit to daisy chain the KVM Switch.
A. Connect Keyboard, Mouse and Monitor to the console port
(white color block) of bank 1 KVM switch.
B. Use one end of 3-in-one Cable Kit to connect the daisy
chain port of bank 1 and the other end for the console port
(white color block) of bank 2 KVM switch.
C. Please repeat item B to daisy chain more bank as you
want. But, the maximum daisy chain bank is eight levels.
D. Before chaining the slave bank up to six banks, you need
a VGA extender (Max. 100 feet ) between the fifth bank
and the sixth bank to enhance the VGA signal.
11