Physically Connecting The New Server - Avaya Equinox Manual

Installing the new streaming and recording server
No. Task
communicate with the Equinox
Streaming and Recording
Manager.
7 Register each of the
components with the main
server.
8 On the delivery node (DN),
configure the parent delivery
node.
9 On the conference point (CP),
configure the gatekeeper IP
and source DN.
10 On Equinox Streaming and
Recording, configure the
network address for device
communication.
11 Register Equinox Streaming
and Recording with Equinox
Management.
12 Configure the Avaya Equinox
Recording Gateway.

Physically connecting the new server

Before you begin
You require a keyboard, a mouse, and a monitor. You also require several IP addresses and up to
six category 5e LAN cables. Ensure that you received the following items with your Avaya Equinox
Streaming and Recording Server (Equinox Streaming and Recording):
• Power cords
August 2017
Description
Registering each of the
components
Configuring delivery nodes
page 64
Configuring conference points
page 70
Specifying polling intervals and
the network address
page 72
Adding and Modifying Recording
and Streaming servers in
®
Scopia Management
page 73
Configuring the Avaya Equinox
Recording Gateway
Installing the Avaya Equinox Streaming and Recording Server
Comments on this document? infodev@avaya.com
Notes
network each device uses
to communicate with the
Equinox Streaming and
Recording Manager. This
forces the proper
communication path to and
from the Equinox
Streaming and Recording
Manager no matter which
IP the Equinox Streaming
and Recording Manager
uses to communicate with
the Equinox Streaming
and Recording device.
on page 61
on
on
on
on
on page 76
26