Registering Each Of The Components - Avaya Equinox Manual

e. Click Finish.
3. Configure the external address for the transcoder.
a. Type https://<CP FQDN/IP Address>:8445/ in a web browser.
b. Log in to the system using the credentials that you configured when you updated the
default username and password.
c. Navigate to System Configuration > Transcoder Configuration.
d. Enter the external address in the Transcoder Address.
This is the address of the transcoder, which is the Windows server hosting the CP
virtual machine.
e. Click Finish.
Note:
If you are using IP addresses, the certificates have to be generated for the IP address.
The IP address has to be included on both the Common Name field and the Subject
Alternative Name field when generating the certificates. If the IP address is not included
in the Subject Alternative Name field, certain devices, such as Mac computers or
Android mobile devices may not operate correctly.

Registering each of the components

After you have applied a license to each of the components of the Avaya Equinox Streaming and
Recording Server, you must register them with the Avaya Equinox Streaming and Recording Server
Manager.
You must register all delivery nodes, virtual delivery nodes, and conference points with the Manager.
In addition, you must register the transcoder with the conference point. You do not have to register
the transcoder with the Manager.
About this task
The registration process is the same for all delivery nodes, virtual delivery nodes, and conference
points.
Procedure
1. Type https://<Equinox Streaming and Recording manager FQDN/IP
address>:8445 in a web browser.
2. Log in to Equinox Streaming and Recording. The following credentials are the default
credentials, but when you first log in, you are prompted to update your password:
• Username: admin
• Password: admin
August 2017 Installing the Avaya Equinox Streaming and Recording Server
Comments on this document? infodev@avaya.com
Registering each of the components
61