Configuring The Avaya Equinox Recording Gateway - Avaya Equinox Manual

Installing the new streaming and recording server

Configuring the Avaya Equinox Recording Gateway

Audio-only and audio and web collaboration conferences use SIP. Video, audio, and web
collaboration conferences use H.323. In order to support this mix of protocols, you must deploy a
Avaya Equinox Recording Gateway. You can deploy the Avaya Equinox Recording Gateway using
the Avaya Equinox Management interface.
When a user records a conference, Avaya Equinox Management identifies the type of recording that
is required by the user. The Audio Service and Audio Service with Web Collaboration meeting types
are used when a user requests the recording of an audio-only or audio and web collaboration
conference. When a user requests the recording of a full video, audio, and web collaboration
conference, Avaya Equinox Recording Gateway is not used.
About this task
This section summarizes the steps for configuring the Avaya Equinox Recording Gateway to enable
it to be used for the recording of conferences that use SIP. For more information on adding the
gateway to Avaya Equinox Management and for information on configuring the meeting types, see
Administering Avaya Equinox Management, which is available on support.avaya.com.
Procedure
• Add the Avaya Equinox Recording Gateway as a gateway, in Avaya Equinox Management.
There is a drop-down menu, called Avaya Recording Gateway.
• Upload the default audio prompts to the Avaya Equinox Recording Gateway.
• Verify that the two new meeting types are displayed in the Avaya Equinox Management
interface.
• Ensure that you are logged into Avaya Equinox Management as an administrator.
• Two meeting types are available and can be selected when configuring your virtual room or
scheduling a meeting. They are Audio Service and Audio Service with Web Collaboration.
August 2017 Installing the Avaya Equinox Streaming and Recording Server
Comments on this document? infodev@avaya.com
76