Avaya Equinox Manual page 71

MCUs and/or Equinox Media Servers in Equinox Management. When a program starts, Equinox
Management includes the desired location, and a conference point close to the MCU/Media Server
can be selected. If there are no conference points matching the location passed by Equinox
Management, then any conference points without a location are treated as a single pool of
conference points, and one of those is selected. If there are no conference points available, the call
fails.
Each conference point has a limit to the number of simultaneous high definition or standard
definition calls it can handle.
Procedure
1. Log in to Equinox Streaming and Recording. The following credentials are the default
credentials, but when you first log in, you are prompted to update your password:
• Username: admin
• Password: admin
2. Select the Devices tab.
3. From the Browse menu on the left, click Conference Points.
4. Click the name of the conference point to display the conference point details.
Figure 18: Conference Point Details
5. Configure the settings, as described in
Table 12: Conference Point Details
Field Name
Name
Version
August 2017
Table 12: Conference Point Details
Installing the Avaya Equinox Streaming and Recording Server
Comments on this document? infodev@avaya.com
Configuring conference points
Description
Enter a name for the conference point.
Verify the version and MAC address of the
conference point.
on page 71.
Table continues...
71