Avaya Equinox Manual page 49

• If you have selected Media Node only on the Select Configuration screen, select whether
you want to install the recording and delivery (streaming) components, the recording
components, or the delivery components by selecting Configure content recording and
streaming components, Configure content recording components only, or
Configure content streaming components only.
7. Click Next.
8. (Optional) At this point, you can choose to install a Virtual Delivery Node (VDN).
9. (Optional) At this point, you can choose to install a SAN.
10. Click Next to skip the optional screens.
11. On the Finish Configuration screen, click Finish.
The Equinox Streaming and Recording Configuration Utility installs the Equinox Streaming
and Recording components.
12. On the Complete Configuration screen, click View Addresses to display the MAC addresses
of the Equinox Streaming and Recording server.
You require these MAC addresses in order to license the Equinox Streaming and Recording
server. The MAC addresses are also stored in C:\assrconfigtool
\MAC_Addresses.txt.
13. Make note of the MAC addresses.
This information is required when you access the Avaya PLDS system to obtain a license
key.
Next steps
Return to the Installation checklist
Related links
Running the configuration utility to configure a VDN
Running the configuration utility to configure a SAN
August 2017
Figure 9: Deployment Type
on page 25 to see your next task.
Installing the Avaya Equinox Streaming and Recording Server
Comments on this document? infodev@avaya.com
on page 50
on page 50
Configuring the new server
49