Avaya Equinox Manual page 62

Installing the new streaming and recording server
3. Select the Devices tab.
4. Click on Register Devices from the left Actions menu.
5. Enter the IP address or FQDN of the component that you want to register and click Register.
6. Repeat this step for each of the components.
7. (Optional) Verify the registration for the conference point.
a. Type https://<CP FQDN/IP Address>:8445/ in a web browser.
b. Log in using the following credentials:
• Username: administrator
• Password: administrator
c. (Optional) If this is the first time that you have logged in, you are prompted to update
your password.
d. From the left menu bar, click System Configuration.
e. Click Enable Services.
f. Under Manage Device, click Configure.
g. Verify that the Manage Registration State is Registered and the Manager Host is the
proper manager IP.
8. (Optional) Verify the registration for the delivery node or virtual delivery node.
a. Type https://<DN FQDN/IP Address>:8445/ in a web browser.
b. Log in using the following credentials:
• Username: administrator
• Password: administrator
c. (Optional) If this is the first time that you have logged in, you are prompted to update
your password.
d. From the menu bar, click Configuration.
e. Verify that the Manage Registration State is Registered and the Network Address is
the proper manager IP.
9. Register the transcoder.
a. Type https://<CP FQDN/IP Address>:8445 in a web browser.
b. Log in using the following credentials:
• Username: administrator
• Password: administrator
c. (Optional) If this is the first time that you have logged in, you are prompted to update
your password.
August 2017 Installing the Avaya Equinox Streaming and Recording Server
Comments on this document? infodev@avaya.com
62