Configuring Conference Points - Avaya Equinox Manual

Installing the new streaming and recording server
Field Name
Disk Usage
If this system is in enterprise mode, the CDN panel is displayed here. If this system is in multi-tenant
mode, the CDN panel is displayed in the Organizations tab.
Account Hash
Host Hash
Username
Password
FTP User Name
FTP Password
Enable maintenance mode
6. Click Save.
Next steps
In order for the VDN to push content to the CDN, you must configure your network to enable
external access because the VDN must have access to the Internet in order to communicate with
the CDN. If you have a firewall, you can place the VDN in a DMZ or you can open the appropriate
ports on the firewall to enable external communication. Specifically, the VDN must be able to access
upload.hwcdn.net using FTP on port 21. In addition, the VDN requires HTTP or HTTPS acccess
to the CDN.

Configuring conference points

You must configure a conference point to capture H.323 video content and deliver live and on
demand webcasting. The Equinox Streaming and Recording conference point includes an
embedded transcoder to convert H.323 calls into Windows Media or .MP4 format.
Each conference point must be associated with a delivery node. A delivery node streams and
optionally archives the content captured by the conference point and delivers it to client systems.
You can configure a conference point to be in a geographic location. This means that you can
assign a location to one or more conference points which coincide with locations set for Scopia Elite
August 2017 Installing the Avaya Equinox Streaming and Recording Server
Comments on this document? infodev@avaya.com
Description
node supports a total of approximately 600GB
(Avaya Common Server 2) or 900GB (Avaya
Common Server 3) at RAID level 1.
Enter the account hash value taken from Strike
Tracker 3 Portal.
Enter the host hash value taken from Strike
Tracker 3 Portal Host Configuration.
Enter the StrikeTracker 3 username and
password that you used to purchase the CDN
service.
This field enables the uploading of recordings to
the CDN. Enter proper cloud storage FTP
credentials specific to the customer account. You
receive these credentials when you purchase the
CDN service.
Select to disable the device so that you can add
or remove external storage (DN) or take it out of
service (CP and DN). When a device is in
maintenance mode, it does not accept new
recordings and users cannot playback
recordings that are stored on it.
70