Physically Connecting The New Server - Avaya Scopia Installing Manual

No. Task
7 Register each of the
components with the main
server.

Physically connecting the new server

Before you begin
You require a keyboard, a mouse, and a monitor. You also require several IP addresses and up to
four category 5e LAN cables. Ensure that you received the following items with your Avaya Scopia
Streaming and Recording server (Scopia
• Power cords
• Rack mount kit
Procedure
1. Connect the keyboard, mouse, and monitor.
2. Connect the LAN cable(s).
®
Scopia SR comes with four 1 Gbit NICs which are bonded. Connect to at least one or all
four. They all respond with a single IP address.
Figure 7: Front and Rear Views
June 2015
Description
Registering each of the
components
®
SR):
on page 20 displays the unit.
Installing the Avaya Scopia
Comments on this document? infodev@avaya.com
Physically connecting the new server
on page 34
®
Streaming and Recording Server
Notes
with the
®
Scopia SR
Manager. This
forces the
proper
communication
path to and
from the
®
Scopia SR
Manager no
matter which IP
®
the Scopia SR
Manager uses
to
communicate
with the
®
Scopia SR
device.
®
19