Avaya Equinox Manual page 74

Installing the new streaming and recording server
If you are using the Avaya Scopia Content Center Streaming and Recording Server, you need to
configure and manage the servers using the Avaya Scopia Desktop Server. For more information,
see the Administrator Guide for Avaya Scopia Desktop Server, which is from a previous release and
is available on support.avaya.com.
Important:
Once you configure a Equinox Streaming and Recording Server you cannot revert back to the
Scopia Content Center Streaming Server or the Scopia Content Center Recording Server.
Procedure
1. Access the Equinox Management administrator portal.
2. In the Devices tab, select Streaming & Recording Server.
3. If you are modifying the Equinox Streaming and Recording Server, select the link in the
Name column, or select Add to create the Equinox Streaming and Recording Server profile.
The Add Streaming & Recording Server page appears
Equinox Streaming and Recording server
4. Configure the Equinox Streaming and Recording Server's settings, as described in
14: Configuring the Avaya Equinox Streaming and Recording
Table 14: Configuring the Avaya Equinox Streaming and Recording
Field Name
Name
IP address/FQDN
August 2017
Figure 19: Adding an Avaya Equinox Streaming and Recording server
Description
Enter a name to identify the Equinox Streaming and Recording Server.
Enter the management IP address or the FQDN of the Equinox
Streaming and Recording Server. This is the address that clients use
to access the Equinox Streaming and Recording Server portal within
Installing the Avaya Equinox Streaming and Recording Server
Comments on this document? infodev@avaya.com
(Figure 19: Adding an Avaya
on page 74).
on page 74).
(Table
Table continues...
74