Configuring The New Server - Avaya Equinox Manual

Streaming and recording server
Table of Contents

Advertisement

When you enter Y, the server reboots.
14. When the server starts up again, press Ctrl+Alt+Delete to log in.
15. (Optional) Synchronize the time on the new server with the time on your NTP server.
a. Click on the time and date in the task bar.
b. Click (Change date and time settings...).
c. On the Date and Time tab, perform the following actions:
• Set the correct date and time using the Change date and time button.
• Set the correct timezone using the Change timezone button.
d. On the Internet Time tab, click Change settings... and perform the following actions:
• Ensure that Synchronize with an Internet time server is selected.
• Enter the NTP server in the Server list.
• Click OK.
16. Click OK.
Next steps
Return to the
Installation checklist

Configuring the new server

The Avaya Equinox Streaming and Recording Server Configuration Utility launches automatically
when the operating system is loaded for the first time. You can also run the configuration utility at
any time from the Start menu or from the desktop shortcut.
If you previously installed a Delivery Node (DN), either as part of an all-in-one deployment or on its
own, you can add or remove a Virtual Delivery Node (VDN) or an external storage device called a
storage area network (SAN), without disrupting the server configuration. If you have not previously
installed a DN, the configuration utility erases any previous configurations on the Equinox Streaming
and Recording server.
About this task
Ths task describes how to configure Equinox Streaming and Recording in an enterprise deployment.
If yours is a service provider deployment, the steps vary slightly.
Procedure
1. On the Choose Setup Language dialog, select your preferred language.
2. On the next screen, click Next.
The first time you run the configuration utility, a Welcome screen is displayed.
If you have not configured a delivery node (DN) and you run the configuration utility again, a
Warning screen is displayed because you may be about to perform a harmful action.
August 2017
on page 25 to see your next task.
Installing the Avaya Equinox Streaming and Recording Server
Comments on this document? infodev@avaya.com
Configuring the new server
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents