The Pre-Installed Demonstration Port And Additional Licenses - Avaya Equinox Manual

Streaming and recording server

Table of Contents

The pre-installed demonstration port and additional licenses

License Ports

CP Only

10**

Yes

The pre-installed demo port is available on the Equinox Streaming and Recording appliance-only,

after unpacking the server and before any license is entered. That is to say, it is available when you

buy your hardware (Common Server 3) from Avaya. It is not available for the Windows Imaging

Format (WIM) that you install when you provide your own hardware.

Note:

When you enter an All-in-one 5 port license or a Manager license or a Media Node license on

an Equinox Streaming and Recording appliance, the license replaces and erases the pre-

installed demo port on the appliance. As a result, the only possible numbers of recording ports

available on an Equinox Streaming and Recording appliance are either 1 (pre-installed demo

port), 5 or 10.

Avaya distinguishes between an All-in-one server and a distributed Media Node. You can configure

a distributed Media Node for any of the following combinations:

• Both recording and streaming processing. In this case, it provides a recording capacity as

shown on row 3 of the table. Row 3 is also the recording capacity of an All-in-one server on

which two All-in-one 5 port licenses have been entered. Streaming capacity in both cases is up

to 1,500 viewers (live or playback from up to 400 differing content source videos).

• Only recording (shown Conferencing Point (CP) only on the table above). No streaming. It

provides a recording capacity as shown on row 4 of the table above.

• Only streaming. No recording. Streaming capacity in this case is up to 3,500 viewers (live or

playback from up to 400 differing content source videos). The fourth row is a media node only

(distributed deployment) configured for recording only.

Table of Contents