Installing The Hp Proliant Dl360 G9 Server - Avaya Equinox Manual

For more information about connecting and securing the power cable, see Connecting the
power cables and Securing the power cord of the Getting Started Guide.
Related links
Physically connecting the new server
Setting an administrator password
About this task
You can set a password to protect the server from changes to the BIOS settings. In addition, the
password protects against configuration changes such as updates to the Boot order, iDRAC
configuration, and Boot enable or disable.
If you add password for BIOS, you must protect, retain, and provide the password when changes to
the server are required.
Before you begin
Ensure that a monitor and USB keyboard and mouse are connected to the server.
Procedure
1. While restarting or turning on the server, at the Dell splash screen, press F2 to select
System Setup.
2. On the System Setup screen, click System BIOS.
3. Click System Security.
4. In the Setup Password field, type a password.
5. In the Password Status field, click Locked.
6. Click Back.
The system displays a prompt to enter the password again.
7. Click Back.
8. Click Finish.
9. Click Finish, and then Confirm or Exit.
The system exits menus and continues booting the server.
Related links
Physically connecting the new server

Installing the HP ProLiant DL360 G9 Server

HP Server overview
The Avaya Common Servers category includes HP servers that support several Avaya software
solutions, some requiring more hardware, and memory requirements beyond the standard
August 2017
on page 26
on page 26
Installing the Avaya Equinox Streaming and Recording Server
Comments on this document? infodev@avaya.com
Physically connecting the new server
35