Verifying/Updating Firmware; Log In Screen On The Web User Interface - IBM TS3100 Setup, Operator, And Service Manual

d. For Dual Stack IPv4 + IPv6, enter your library's IP address for either IPv4 or IPv6.
3. When the login screen displays,
a. Select admin for a user ID.
b. Enter secure for a Password.
Figure 40. Log in screen on the Web User Interface

Verifying/updating firmware

About this task
It is important to run the latest level of firmware. To ensure that you are running the latest levels of
library firmware, drive firmware, and SNMP MIB (Management Information Base) file, complete this
procedure.
Procedure
1. Verify the SNMP MIB file that is installed on your SNMP server. Verify the levels of library and drive
firmware that is installed on your library by completing the following steps:
a. Expand Monitor Library in the left navigation pane of the Web User Interface.
b. Click Library Identity and make note of the Firmware revision.
c. Click Drive Identity and make note of the Firmware revision.
d. Log out of the Web User Interface.
2. Download the latest library firmware, drive firmware, and SNMP MIB (Management Information
Base) file from the IBM website.
a. Enter http://www.ibm.com/storage/support/ in your internet browser address field and press
Enter on your keyboard.
b. Select Tape Systems from the Product Family list, then select TS3100 Tape Library or TS3200
Tape Library from the Product list.
c. Click the Download tab, then click Firmware.
d. Click TS3100 Tape Library Firmware or TS3200 Tape Library Firmware.
e. Compare the firmware level available on the web to the levels that you made note of in step 1. If
you are running the latest levels of library and drive firmware, proceed to the next step. If you are
not running the latest levels of library and drive firmware, download the firmware that must be
updated to your library host.
3. Update library and drive firmware on your library, if necessary.
a. Enter the IP address of your library in your internet browser address field and press Enter on
your keyboard.
b. Log in to your library's Web User Interface.
c. Expand Service Library in the left navigation pane of the Web User Interface.
d. Click Upgrade Firmware.
e. Browse to the new firmware level on your host, then click Update. Do this updating for both
library and drive firmware, if necessary.
60
IBM TS3100 Tape Library and TS3200 Tape Library: Setup, Operator, and Service Guide Machine Type 3573