Parameter
Code
Flag name
13d
Library Pick
Retry
14d
Library Place
Retry
15d
Drive Load
Retry
16d
Library Door
17d
Library I/O
Station
19d
Library
Security
24d
Library
Inventory
27d
Cooling FAN
Failure
32d
Unreadable
Bar Code
Labels
v I = Informational suggestion to user
v W = Warning. Remedial action is advised. Performance of data may be at risk.
v C = Critical immediate remedial action is required.
292
IBM TS3100 Tape Library and TS3200 Tape Library: Setup, Operator, and Service Guide Machine Type 3573
Type
Description
W
There is a potential problem with the cartridge loader picking a cartridge
from a drive or slot.
v No action needs to be taken at this time.
v If the problem persists, contact Technical Support
This flag is cleared when the next move command is received.
W
There is a potential problem with the cartridge loader placing a cartridge
into a slot.
v No action needs to be taken at this time.
v If the problem persists, contact Technical Support.
This flag is cleared when the next move command is received.
W
There is a potential problem with the cartridge loader or drive when
placing a cartridge into a drive.
v No action needs to be taken at this time.
v If the problem persists, contact Technical Support.
This flag is cleared when the next move command is received.
W
The operation has failed because the library door is open.
v Clear any obstructions from the library door.
v Close the library door.
v If the problem persists, contact Technical Support.
This flag is cleared when the door is closed.
C
There is a mechanical problem with the library media I/O Station.
W
Library security has been compromised. The door was opened then
closed during operation.
C
The library has detected an inconsistency in its inventory.
v Redo the library inventory to correct inconsistency.
v Restart the operation.
Check the applications users manual or the hardware users manual for
specific instructions on redoing the library inventory.
W
One or more fans inside the library have failed. This flag is cleared when
all fans are working again.
I
The library was unable to read the barcode on a cartridge.