Table of Contents
Advertisement
Preface
Purpose of This
Manual
Target Audience
Applicability of
This Manual
7UM62 Manual
C53000-G1176-C149-3
This manual describes the functions, operation, installation, and placing into service
of the device. In particular, one will find:
• Information regarding customizing of the device and descriptions of device
functions and settings → Chapter 2;
• Instructions for mounting and commissioning → Chapter 3;
• Instructions for mounting and commissioning → Chapter 4;
• As well as a compilation of the most significant data for experienced users in the
Appendix A.
For general information on the operation and configuration of SIPROTEC
please refer to theSIPROTEC
Protection engineers, commissioning engineers, personnel concerned with
adjustment, checking, and service of selective protective equipment, automatic and
control facilities, and personnel of electrical facilities and power plants.
This manual is valid for: SIPROTEC
Transformer Protections; firmware version 4.1.
Indication of Conformity
This product complies with the directive of the Council of the European Communities
on the approximation of the laws of the member states relating to electromagnetic
compatibility (EMC Council Directive 89/336/EEC) and concerning electrical
equipment for use within certain voltage limits (Low-voltage Directive 73/23/EEC).
This conformity is proved by tests conducted by Siemens AG in accordance with
Article 10 of the Council Directive in agreement with the generic standards EN 50081
and EN 50082 for EMC directive, and with the standard EN 60255–6 for the low-
voltage directive.
The product conforms with the international standard of the series IEC 60255 and the
German standard DIN 57435 /Part 303 (corresponds to VDE 0435/Part 303).
This product is UL–certified with the data as stated in Section 4.1:
IND. CONT. EQ.
TYPE 1
69CA
®
4 System Manual (Order No.: E50417–H1176–C151).
®
4 7UM62 Multifunction Generator, Motor and
®
4 devices,
IND. CONT. EQ.
TYPE 1
i
Advertisement
Table of Contents
