BCB mounting in horizontal curves
NOTE
Limited absolute measurement accuracy and reproducibility!
Installing the BCB in bends impairs the absolute precision of the BPS, because the
grid dimension can no longer be detected as 30 mm due to the optical distortion of
the bar code.
For horizontal curves, maintain a minimum bending radius of 300 mm ((see figure 6.4)).
A BPS 8
B Reading distance
C Bar code tape radius, R
Figure 6.4: Mounting the bar code tape for use in horizontal curves
Leuze electronic
C
B
A
= 300 mm
min.
BPS 8
Mounting and installation
37