Position Detection - Leuze electronic BPS 8 Original Operating Instructions

8.5.2

Position detection

Figure 8.6: Position detection tab
Description:
The position detection controls all settings that affect the position values.
Resolution parameter
Parameter
a
Resolution
in [mm]
With the Resolution parameter, the resolution for the position values is defined. This param-
eter also performs a rounding correction (the position value is divided by the defined value
range).
The resolution only determines the mathematical decimal value and has no effect on the
measurement accuracy.
Leuze electronic
Description
The parameter specifies the
resolution for the position value.
The resolution has no effect on
- Static preset
- Offset.
Configuration / device parameters
Value range
1: 0.01
2: 0.1
3: 1
4: 10
5: 100
6: 1,000
BPS 8
Default Unit CR
3 mm –
73