Deleting A Mark Or Waypoint; Moving A Mark Or Waypoint - Standard Horizon CP500 Owner's Manual

2. Using the ShuttlePoint knob move the cursor over the Mark. Press [E
edit popup window.
3. Use the ShuttlePoint knob to change to the Mark Icon, when finished press [ENT].
4. Move the ShuttlePoint knob to the right to select the Mark Name. Press [ENT] and the
first digit in the name will be highlighted.
5. Move the ShuttlePoint knob up or down to select the first character.
6. Move the ShuttlePoint knob to the right to select the next character.
7. Repeat steps 5 and 6 until the Mark name is shown. Press [ENT].
8. Move the ShuttlePoint knob to the right and press [ENT] to change the Mark Icon's Color.
9. Move the ShuttlePoint knob to up/down, left/right to select the Mark Icon's Color. When
finished press [ENT].
10. Move the ShuttlePoint knob to the right to select the Lat/Lon and press [ENT].
11. Move the ShuttlePoint knob up or down to select the first character.
12. Move the ShuttlePoint knob to the right to select the next character.
13. Repeat steps 11 and 12 until the desired position is shown. Press [ENT] and [CLR] to
store the Mark.
7.1.0

Deleting a Mark or Waypoint

Using the ShuttlePoint knob, move the cursor over the Mark or Waypoint to delete. Press
[D ]. A Warning popup window will be shown. Select YES and press [ENT].
ELETE
7.1.1

Moving a Mark or Waypoint

Place the cursor over the Mark or Waypoint which you want to move and press [M
the ShuttlePoint knob to move the cursor. A dotted line, connecting the previous Waypoint
position to the new position, is shown:
Page 44
Figure 7.1 - Mark editing
Figure 7.1a - Mark editing
Figure 7.1.1 - Moving Mark or Waypoint (I)
] to show the
DIT
]. Use
OVE
CP500