Reading The Manual: Symbols And Conventions; How To Obtain A New Copy Of The Manual - Euronda E9 Next 18L Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Euronda S.p.A. reserves the right to make modifications or improvements to the manual or unit without

notice and without being obliged to update previous products and manuals. The information contained in this

manual refers to the unit the characteristics of which are specified in chap. 5.3.1 "Rating plate".

If the unit is resold, it must be delivered to the new owner together with this manual. In this case, the maker

must be informed of the new owner (see chap. 11.2 "Resale").

2.4

In this manual, symbols are placed beside certain descriptions, notes, etc..

These symbols are used to attract the attention of readers to a particular note or piece of information. Their

meanings are explained below.

SYMBOL

DESCRIPTION

IMPORTANT SAFETY INFORMATION

This symbol is used to draw the reader's attention to particularly important notions

for operator safety.

INFORMATION AND PRECAUTIONS

This symbol refers to general indications and advice.

STRICTLY FORBIDDEN

This symbol means it is strictly forbidden to perform the operation in question.

Failure to observe this prohibition may cause serious harm to the operator or

damage to the unit.

The manual is divided into chapters and sub-chapters; the figures are numbered with the chapter to which

they refer, with the addition of a progressive number. E.g. Fig. 3.4-1 (figure No. 1 relative to chap. 3.4).

If the manual is lost or destroyed, ask Euronda S.p.A. for a new copy. Provide the following information:

model and serial number of the unit;

name and address where the manual should be sent.

Send your request to the following address: