Euronda E9 Next 18L Instruction Manual page 30

Before starting the selected cycle, load the material to sterilize into the unit:
1. Open the door (Fig. 7.1-1).
Fig. 7.1-1
2. Place the trays with the material to sterilise inside the unit.
In order to load the material to sterilize correctly, carefully read all the instructions given in
Appendix 1 "Preparing the instruments for sterilization", Appendix 2 "Packaging" and
Appendix 3 "Positioning the load".
3. Close the door: pull the handle towards you while pushing the door in, and then turn the handle back
towards the unit.
4. Select the cycle type following the instructions given in chap. 7.2.
29
Aquafilter
E9 NEXT
E9_Next_Ing_rev03 – 10/10/2018