Inserting And Removing The Sd Card - Euronda E9 Next 18L Instruction Manual

Turn off the steriliser before removing the SD memory card. Put the SD memory card back
in before turning the unit on again. The absence of the SD memory card during operation
may cause errors.
Do not perform cycles if the SD memory card is not inserted: if cycles are performed
without the SD memory card, or if the card is removed during the cycle, the corresponding
cycle data will be lost.
To insert and remove the SD memory card into/from the slot, simply push it in (ensuring that the pin faces
the front of the autoclave) until it clicks in position.
If the SD card enters the slot with difficulty, do not force the mechanism and check it was
inserted in the right direction.
Fig. 8.3-1
You may check is the PC recognises the external memory correctly by seeing if it appears as a "Removable
disk" in "Explorer".
The E-memory Software indicates the state of the device in the Links page; the following conditions may
occur:
8.3

INSERTING AND REMOVING THE SD CARD

USB device not connected.
•
USB device not found.
•
USB device found but MEMORY.DAT marker file
•
missing.
USB box empty.
•
USB device found but SETUP.DAT machine
•
description file missing or incorrect. The USB box
indicates the hard disk.
OK, sterilisation cycles being loaded.
•
54
Aquafilter
E9 NEXT
E9_Next_Ing_rev03 – 10/10/2018