Date And Time Set Up; Expiry Days And Label Number Set Up; User Set Up - Euronda E9 Next 18L Instruction Manual

Aquafilter
E9 NEXT

7.7.1 Date and time set up

To change the date and time simply touch the field to change, which will turn grey, and change the value
using the up and down arrows. The various changes made will become active once confirmed by pressing
the central key, therefore leaving the specific screen.

7.7.2 Expiry days and label number set up

In label printing mode, the unit prints the sterile condition expiry days on the labels.
By default the unit assigns an expiry of 30 days, and the number of labels to print to 0.
In order to change the number of labels, simply select/touch the upper field, and change the value using the
up and down arrows. Use the lower field to change the expiry days. The various changes made will become
active once confirmed by pressing the central key, therefore leaving the specific screen.

7.7.3 User set up

The unit gives the possibility of associating each sterilisation cycle to the user launching it. By default, this
function is not enabled. To enable it, simply touch the Users icon. Enter a list of users, with the name and
surname of each one of them. Each user must be allocated a password. Once all users have been entered,
the user list can be activated by touching the icon on the right, which will turn green.
39
E9_Next_Ing_rev03 – 10/10/2018