10.5
IO-Link Test Event Generator
You can use the IO-Link Test Event Generator to send messages through the IO-Link Master. The
generated events are displayed in the Diagnostics | IO-Link Settings page under the Last Events field
and the syslog.
Port
Mode
Type
Instance
Source
PDI
Leuze electronic
IO-Link Test Event Generator Descriptions
The port number to which you want to send an event.
This is the first item in the event generated.
•
Single: generates Single in the event.
•
Coming: generates Active in the event
•
Going: generates Cleared in the event
This is the second item in the event generated.
•
Message: generates Message in the event.
•
Warning: generates Warning in the event.
•
Error: generates Error in the event.
This is the level in which the event is generated. This is not
displayed in the generated event.
•
unknown
•
physical
•
datalink
•
applayer
•
application
This is the source in which the event is generated. This is the
third item in the generated event.
•
local: simulation generated from the IO-Link Master, which
displays as Local in the event.
•
remote: simulation of an IO-Link device event, which displays
as Device in the generated event.
This indicates whether to send valid or invalid PDI, which is not
displayed in the generated event.
•
valid
•
invalid
MD 748i / MD 248i
10 Utilizing IO-Link Master Features
75