Using The Web Interface To Assign The Device Name - Leuze electronic MD 748i Connecting And Operating Instructions

Figure 10:
2. Click the Browse button to open the Browse Network window.
The unit should be displayed as an IO-Link Master with an empty device name.
3. Select the unit and click the OK button to return to the
4. Set the device name. PROFINET IO Device Names are not case-sensitive. In this example, the
device name was set to MD248I.
If there is a cyclic communication between the device and an IO controller, the cyclic communication has
to be stopped before the device name can be changed.
3.5.2

Using the Web Interface to Assign the Device Name

You can use the Configuration | Profinet IO Settings page to assign the device name for PROFINET IO
with the IO-Link Master.
Note: Changes to device name using the web interface take effect immediately. It may interfere with the
communication between the device and IO controller.
1. If necessary, open the IO-Link Master web interface with your web browser using the IP address.
2. Click Configuration | PROFINET IO Settings.
Figure 11:
Leuze electronic
IO-Link Master Ethernet properties
Web configuration PROFINET IO settings
3 Configuring the IO-Link Master with STEP 7
Edit Ethernet Node
MD 748i / MD 248i
window.
23