This document provides installation, configuration and embedded web interface information for the Leuze
electronic Profinet IO-Link Master.
The web interface provides a platform so that you can easily configure, review diagnostic pages, and
access advanced features, such as the ability to:
Set up user accounts with different user levels and passwords
Load IODD files and configure IO-Link device parameters
Implement manual or automatic data storage (upload or download)
Implement device and/or data validation
The IO-Link Master installation includes the following procedures.
1. Connect the power and Ethernet cable.
2. MD 748I-11-42/L5-2222: If desired, set the rotary switch.
Note: Optionally, you can configure the IP address using the embedded web interface.
3. Configure PROFINET IO.
4. If necessary, upload the latest images for the latest features.
5. Connect the IO-Link and digital I/O devices.
6. Use the web interface to configure the following:
a. If desired, upload the appropriate IODD files for your IO-Link devices for IO-Link device
configuration.
b. Use the Diagnostic pages to monitor or troubleshoot your devices.
Leuze electronic
MD 748i / MD 248i
1 Introduction
7