Leuze electronic MD 748i Connecting And Operating Instructions page 35

PDI Length
(0-32)
PDO Length
(0-32)
GET
ATTACHED
(Button)
Leuze electronic
IO-LINK Settings Page
This is input length of the PDI data field.
This is required if you select a Data Validation Mode other than
The PDI Length can be manually entered in this field or click the GET ATTACHED
button and the IO-Link Master propagates the PDI length in this field.
This is input length of the PDO data field.
This is required if you select a Data Validation Mode other than
The PDO Length can be manually entered in this field or click the GET ATTACHED
button and the IO-Link Master propagates the PDO length in this field.
After opening a port for editing, you can click the GET ATTACHED button instead
of manually entering data in the following fields:
• Vendor Id
• Device Id
• Serial Num
• PDI Length
• PDO Length
MD 748i / MD 248i
3 Configuring the IO-Link Master with STEP 7
None
.
None
.
35