Leuze electronic MD 748i Connecting And Operating Instructions page 61

Note: You may want to verify that the Automatic Download Enable for Data Storage option on the Configuration
| IO-Link Settings page is NOT set to On as this can cause unreliable results on the corresponding port.
1. If you have not done so, load the IODD file from the IO-Link device manufacturer (chapter 8
Loading and Managing IODD Files).
2. Access the appropriate Port page by clicking Attached Devices and then the Port number that you
want to configure.
3. Click the EDIT button after all of the device information is populated in the table.
4. Scroll down the table and make appropriate parameter changes for your environment.
Note: An IODD file may not contain every IO-Link device setting depending on the IO-Link device
manufacturer. If you need to change a parameter that is not displayed in the IO-Link Device - Port
table, you can refer to the IO-Link device Operators Manual and use the IO-Link Device ISDU
Interface to change the settings.
You may need to scroll to the right in the table to view applicable parameter values if the parameter is not
selectable in a drop list.
Figure 38:
5. Click the SAVE button after editing the parameters.
Leuze electronic
IO-Link device settings
MD 748i / MD 248i
9 Configuring IO-Link Devices
61