Updating Application Subassemblies - Leuze electronic MD 748i Connecting And Operating Instructions

Note: Make sure that you download the appropriate software for your model. For example, the FPGA
images are unique for different hardware models and protocol.
2. Open your browser and enter the IP address of the IO-Link Master.
3. Click Advanced | SOFTWARE.
4. Click the UPDATE button next to the image you want to update.
5. Click the Browse button, navigate to the file location, highlight the image, and click Open.
6. Click the Install button.
Figure 23:
7. Click the CONTINUE button to the
8. Click OK to close the
Note: Some images may require the IO-Link Master web server to restart.
5.2.2

Updating Application Subassemblies

Use this procedure to upload applications using the Software page.
1. Download the latest application from the Leuze electronic web site.
2. Open your browser and enter the IP address of the IO-Link Master.
3. Click Advanced and SOFTWARE.
4. Click the Browse button under Update Application navigate to the file location, highlight the
application, and click Open.
5. Click the Install button.
6. Click the CONTINUE button to the
Leuze electronic
Update software application base
Update Image Successful
Update Image
message.
message.
Update Application
message.
MD 748i / MD 248i
5 Updating Images and Applications
42