Configuring Io-Link Ports; Io-Link Port Modules - Leuze electronic MD 748i Connecting And Operating Instructions

Figure 12: Configuring IO Device Update Timer
3. Set the desired update time. The fastest IO device update time is 8ms.
3.7

Configuring IO-Link Ports

The IO-Link Master gateway has two categories of IO modules:
IO-Link Port Modules: see chapter 3.7.1

Port Status Modules: see chapter 3.7.2

IO modules are used to configure IO-Link ports and exchange PDI and PDO data with various IO-Link
devices and digital I/O devices. The following image shows available modules of the IO-Link Master.
Figure 13:
3.7.1

IO-Link Port Modules

An IO-Link port can be configured as one of the following:
 IO-Link Mode
 SIO Digital In Mode
Leuze electronic
IO-Link Master I/O modules
3 Configuring the IO-Link Master with STEP 7
MD 748i / MD 248i 25