Figure 26:
5. Click the SAVE button.
7.3
Digital I/O Setting Parameters
The Configuration | Digital I/O Settings page supports the following options.
D1 Digital Input Configuration
Mode
Default
= Off
Invert Input
Default
= False
Input Settling Time (0 - 10000ms)
Default
= 0ms
Leuze electronic
Save Digital I/O settings
Digital I/O Settings Page
Selects the Mode:
•
Off – No monitoring of the digital input pin.
•
Digital-Input – monitors the digital input status
If Mode is set to Digital-Input, the input status is inverted.
If non-zero and Mode is set to Digital-Input, the required time
that the input status must remain constant before an input
status change is reported.
MD 748i / MD 248i
7 Dedicated Digital I/O Port Configuration
49