10.1.4 Automatic Device Configuration Backup - Leuze electronic MD 748i Connecting And Operating Instructions

7. Set the Automatic Download Enable option to On.
Figure 45:
8. Click SAVE.
9. Click Diagnostics | IO-Link.
10. Replace the IO-Link device on that port with the IO-Link device for which you want configured
automatically.
11. Verify that the IO-Link device displays operational Port Status and the appropriate IO-Link State.
12. Repeat Steps 10 and 11 for as many device as you want to configure.

10.1.4 Automatic Device Configuration Backup

The following procedure shows how to utilize data storage to automatically backup an IO-Link device
configuration.
Remember, if you adjust parameters using Teach buttons those values may or not may be updated in
the data storage, which depends on the IO-Link device manufacturer. If you are unsure, you can always
use the manual UPLOAD feature to capture the latest settings.
1. Click Configuration | IO-Link.
2. Click the EDIT button for the port for which you want to store the data on the IO-Link Master.
3. Select On in the drop list for Automatic Data Storage Upload Enable.
Leuze electronic
Data storage configuration
MD 748i / MD 248i
10 Utilizing IO-Link Master Features
70