Leuze electronic MD 748i Connecting And Operating Instructions page 16

Figure 2: IO Controller Ethernet Interface Properties
3. Uncheck the Use different method to obtain IP address option.
4. Manually enter the IP address and subnet mask for the IO controller.
In this example the IO controller was assigned an IP address of 10.0.0.31 and a subnet mask of
255.0.0.0.
5. Double-click the IO-Link Master; check Assign IP address via IO controller as shown in Figure 3.
Figure 3: IO-Link Master Properties
6. On the General tab, click the Ethernet button, which opens the
window, where you can specify what IP address the IO controller should assign to the IO-Link
Master.
Leuze electronic
3 Configuring the IO-Link Master with STEP 7
MD 748i / MD 248i
Ethernet interface properties
16