Device Name Assignment; Assign The Device Name In Step 7 - Leuze electronic MD 748i Connecting And Operating Instructions

Figure 9:
7. Click the SAVE button.
The next configuration step is to assign the device name, see 3.5 Device Name Assignment.
3.5

Device Name Assignment

Use one of the following methods to configure the Device Name.
 STEP 7 - refer to the following procedure
 Web interface - see 3.5.2 Using the Web Interface to Assign the Device Name for information
about using the IO-Link Master Configuration | PROFINET IO page.
3.5.1

Assign the Device Name in STEP 7

Use the following procedure to configure the Device Name using STEP 7.
1. Select the IO-Link Master, open the Edit Ethernet Node window using the PLC | Ethernet | Edit
Ethernet Node menu.
Leuze electronic
Web Network Configuration Page
3 Configuring the IO-Link Master with STEP 7
MD 748i / MD 248i 22