Figure 39:
9.3
Resetting IO-Link Device Parameters to Factory Defaults
In the event you want to reset the IO-Link device to factory default, typically the IODD file provides the
ability from the IO-Link device manufacturer. Use the following example to reset an IO-Link device.
1. Click the COMMAND button and locate the Restore Factory button.
2. Click the Restore Factory or Load Factory Settings button.
Note: The name of the button is determined by the IO-Link device manufacturer.
Leuze electronic
Save IO-Link device settings
MD 748i / MD 248i
9 Configuring IO-Link Devices
62