7
Dedicated Digital I/O Port Configuration
This section discusses dedicated digital IO port (D1 through D4) configuration, including:
Digital I/O Settings Page
Editing Digital I/O Settings
Digital I/O Setting Parameters
7.1
Digital I/O Settings Page
Use the Configuration | Digital I/O page to configure the dedicated DIO port characteristics for the IO-
Link Master. D1 and D2 are located next to IO-Link Port 1 and D3 and D4 are located next to IO-Link
Port 4.
Figure 25:
7.2
Editing Digital I/O Settings
You can use this procedure to configure digital I/O characteristics for the digital I/O ports.
1. If necessary, open the IO-Link Master web interface with your web browser using the IP address.
2. Click Configuration | Digital I/O.
3. Click the EDIT button.
4. Make appropriate selections for the digital I/O device or devices that you will connect to the ports.
You can use the help system if you require definitions or values for the options or Digital I/O
Setting Parameters.
Leuze electronic
Digital I/O settings
7 Dedicated Digital I/O Port Configuration
MD 748i / MD 248i
48