Plastic lubricant for the tractor
Type
Shell retinax HD2
MOGUL LA 2
MOGUL LV 2M
ÖMV signum
MOL
ORLEN OIL
Liquid for the cooling system of the tractors
Coolant and demineralized water in the ratio of 1:1.5 (carry out refilling of the mixture using this ratio).
While changing or refilling the cooling fill in the engine always use a coolant complying with the prescribed
specifications.
Specification
ASTM D3306
ASTM D 4985
SAE J 1034
Do not use water without an antifreeze for the cooling of a tractor!
Carry out a renewal of the coolant after two years of operation.
Fuel
Diesel oil complying with the regulation of EN 590
Paraffin impurities or additional additives in fuel are not allowed for engines with Common-
Rail injection.
Hydraulic brake liquid for the tractors
Hydraulic oil TITAN ZH LHM PLUS is used as a fluid for hydraulic brakes in tractors.
TITAN ZH LHM PLUS is not compatible with synthetic hydraulic fluids and therefore must not
be mixed with them.
Under no circumstances TITAN ZH LHM PLUS should be mixed with brake fluids of DOT type!
TRACTOR MAINTENANCE
Classification
DIN 51825 KP 2 K-20
ISO 6743/9 CCEB 2/3, ISO - L - XBCEA 2
ISO 6743/9 CCEB 2/3
DIN 51825-K 2 C-30
Liton LT 2EP
Liten® Premium ŁT-4 EP2
106