Instrument Panel; Instrument Panel - Signal Lamps - Zetor MAJOR HS Series Operator's Manual

INSTRUMENT PANEL

Instrument panel - signal lamps

MHS16N076
1 - High beam lights (blue). Lights up with distance lights on.
2 - Not connected
3 - Charging signal lamp (red). With engine run, lights up with charging failure. When the engine is at
standstill, it must be lit.
4 - Hand brake signal lamp (red). It is lit with engaged hand brake.
5 - Lubrication signal lamp (red). With engine running lights up with the oil pressure drop below the critical
limit.
6 - Engine ignition signal lamp (yellow). Indicates the activity of the device for facilitation of engine start.
7 - Fuel level signal lamp of cooling liquid. With engine running, it lights up when the level of the engine
cooling liquid drops below the critical limit.
8 - Air cleaner clogging signal lamp (yellow). Lights up with air filter clogging.
9 - Not connected
10 - Not connected
11 - Not connected
12 - Not connected
13 - Signal lamp of hydraulic circuit oil cleaner clogging. If it lights up when the engine is running, it indicates
clogging and necessity of replacement of this cleaner.
14 - Not connected
15 - Not connected
16 - Market lights (green). It is on when market lights are on.
17 - Stop signal lamp (red)
18 - Not connected
19 - Signal lamp of the high temperature of the cooling liquid. It is on when the temperature of the cooling
liquid exceeds 110ºC.
20 - Signal lamp of the tractor left direction lamps (green).
21 - Signal lamp of the differential closure
22 - Signal lamp of tractor right direction lights (green).
23 - Signal lamp for switching of the rear PTO shaft (yellow)
24 - Fuel level signal lamp (orange). It is on with the remaining 0 - 1/4 of the tank volume.
25 - Not connected
26 - Not connected
41