Checking The Oil In Gear Box, Final Drive Housing And Rear Axle; Replacement Of The Filter Of The Hydraulics Suction - Zetor MAJOR HS Series Operator's Manual

Checking the oil in gear box, final drive housing and rear axle

There is common oil filling of the transmission system.
The oil level is checked with a dipstick (a) located in the
rear part of the tractor on the hydraulics box. The dipstick
hole is used for filling.
Checking should be performed when the engine is not running. The oil level must be within the
range of the dipstick (A).

Replacement of the filter of the hydraulics suction

The suction cleaner is located on the left side of the tractor
behind the fuel tank. Replacement of the filter must be
performed when the gearbox filling is drained.
Prior to the replacement of the filter element put
a suitable vessel for catching the dripping oil under
the tractor.
1. Unscrew the sleeve (1) and water tapes (2)
2. Disassemble the filter element
3. Perform assembly of a new filter element
MAINTENANCE INSTRUCTIONS
117
MHS16N045
MHS16N042