Tractor Greasing Plan; Safety Instructions For Lubrication Of The Tractor; Three-Point Linkage And Rear Semi-Axes Bearings; Front Three-Point Hitch - Zetor MAJOR HS Series Operator's Manual

Tractor greasing plan

Safety instructions for lubrication of the tractor

The tractor maintenance may be performed only by the trained personnel thoroughly familiarized with
operational and safety principles.
During maintenance of the tractor wear appropriate (specified) personal protective equipment
(occupational footwear, protective gloves, safety goggles, etc.).
Prior to starting the work, secure the tractor against movement using manual brake.
Lubrication must be performed only when the engine is at standstill!
Front drive axle
Position Name
number
1 Pivot pins
2 Spigot shaft
3 Cardan shaft joint

Three-point linkage and rear semi-axes bearings

Number Name
of
position
1 Rear semi-axes bearings
2 Lifting rod
3 Upper draw bar bracket

Front three-point hitch

Pos. Identification
no.
1 Pins of cylinders of the front
three-point hitch

Technical maintenance of the tractors after a general overhaul of the main groups

Run in the tractor after a general overhaul in accordance with the instructions for running in a new tractor.
Perform the maintenance in the same way as with a new tractor.
TRACTOR MAINTENANCE
Number of
greasing
points
4
2
2
Number of
greasing
points
2
2
3
No. of
lubrication
points
4
107
8P
NM13N073
02F