Lifting Force Of The Three-Point Hitch; Performance On Rear Pto Shaft; Tensile Force - Zetor MAJOR HS Series Operator's Manual

Lifting force of the three-point hitch

Type of tractor
Maximal lifting force at the end of lower draw bars of
rear three-point linkage when maximum useful pressure
(kN)
Lifting force at the end of lower draw bars of rear three-
point linkage in the whole range of heave with
maximum useful pressure (kN)
Hydraulic system pump supply (l/min)
Working pressure (MPA)

Performance on rear PTO shaft

Performance on PTO shaft (kW ± 2%)
- with nominal engine revolutions and engaged 1000
rpm of PTO shaft
Nominal engine revolutions (2200 rpm)

Tensile force

Type of engine
Maximum tensile force (kN) in swinging draw bar on
concrete, tractor in emergency finish with ballast weights,
with slippage to 15%
MAIN TECHNICAL PARAMETERS
131
Major HS 80
29
27
53
19
Major HS 80
43,8
Major HS 80
36