Engine Heating; Selecting Driving Direction - Reversing Lever; Reversing Lever Position Signalization; Gear Shifting - Zetor MAJOR HS Series Operator's Manual

Engine heating

Do further heating of the engine when driving. Heating engine by lengthy idle run or abrupt
revolutions increase is harmful to the engine. If the temperature of coolant has not reached 45°C, do
not overcome engine revolutions over 2,000 rpm.

Selecting driving direction - Reversing lever

The reversing lever (1) is used to change the tractor
driving direction not using the clutch pedal.
Slightly draw the lever in the position (N) up towards the
steering wheel and move it to the required position (F) or
(R).
F - forward driving; the lever in the front
N - neutral position
R - reverse driving; the lever in the back

Reversing lever position signalization

Individual positions of the reversing lever are indicated by
the backlight of the symbols on the instrument panel:
F - forward driving, red backlight of the symbol when
shifted
N - neutral position, green backlight of the symbol when
shifted
R - reverse driving, red backlight of the symbol when
shifted

Gear shifting

The tractors are equipped with the four stage
synchronized gearbox with the two-stage torque multiplier
and reversal system. The four stage gearbox is shifted by
the main control lever with buttons for control of the torque
multiplier (2) and button for release of the travel clutch (1).
The forward and reverse driving of the tractor is shifted by
the reversing lever located on the column of the steering
wheel.
Only gears are shifted by main gear shifting lever, the direction of travel is shifted by reversing
lever.
DRIVING OPERATION
49
MHS16N014
MHS16N060
MHS16N017